If the service engineer has set up an entrance telephone, you can speak to the door intercom and activate the door opener from your handset. 

If you are authorised to release a door, then a user can open the door by entering a 5-digit code (e.g. by means of a DTMF transmitter or installed keypads).  

Some of the functions described below can also be called directly be entering the relevant code (). 

Talking to a visitor by means of the door opener equipment

Your handset rings. 

Press the Talk key within 30 seconds. You are connected immediately to the door opener. 

If more than 30 seconds have passed: Press the Talk key. 

Enter the internal phone number for the door opener. You are connected to the door opener. 

Using the handset to open the door opener during a call

Select and confirm the menu item.  

Using the handset to open the door opener without holding a conversation

Press the Talk key. 

Call the system menu. 

Select and confirm the menu item. 

Select and confirm the menu item. 

Enter the internal phone number for the door opener. The door is opened. 

Press the On-hook key to end the process. 

Activating the door release

This function only works if it has been configured by the service engineer. 

Press the Talk key. 

Call the system menu. 

Select and confirm the menu item. 

Select and confirm the menu item. 

Follow the user guidance system from this point onwards. Enter the internal phone number of the door opener, as well as the code and type of door release: 

1=Enable with call,

2=Enable without call,

3=Change password.

Confirm your entries. 

Press the On-hook key to end the process. 

Note:  Standard code 00000. To change the code, confirm option "3=Change Password". Follow the user guidance system.

Deactivating the door release

Press the Talk key. 

Call the system menu. 

Select and confirm the menu item. 

Select and confirm the menu item. 

Press the On-hook key to end the process.