|
Home |
 |
optiClient Attendant |
 |
 |
 |
 |
 |
The optiset E control/data adapter allows you to connect a PC to your communication platform via a system telephone (optiset E memory, advance plus/comfort, advance conference/conference). This means that you can also perform all switching functions from your PC.
| 1. | Make sure that the product package contains all of the following items: |
 |
optiset E control/data adapter |
|
optiset E advance plus/comfort, memory, advance conference/conference system telephone |
|
Serial connecting cable |
|
One installation CD-ROM for optiClient Attendant |
|
Installation instructions for optiset E control/data adapter |
|
optiClient Attendant User and Installation manual |
| 2. | Unplug the subscriber line from the optiset E telephone and place the phone on a soft surface with the key field facing down. |
| 3. | Hold the optiset E adapter with the edge connector downward and insert it into one of the two slots on the bottom of the optiset E telephone with the two tabs in the two slits. |
| 4. | Gently press the adapter with its edge connector into the socket connector up to the stop. |
| 5. | Check which COM port on your PC is free (usually COM2). Information on the PC's serial interfaces can be found either in the operating instructions for your operating system or the manual from your PC manufacturer. If you do not have a free COM port, you can configure additional COM ports in your PC (for example, COM3 and COM4) by installing an additional interface card (available from your PC dealer). |
| 6. | Connect the free COM port to the port on the back of the optiset E control/data adapter using the serial cable provided. |
| 7. | If applicable, connect the headset to the optiset E control/data adapter. |
| 8. | Reconnect the subscriber line to the optiset E telephone. |
| 9. | Start your PC and install the optiClient Attendant software  . |
 |
||||
|
||||
|
|
|
||
|
 |
||
| HiPath 3000 - User and Installation Manual - optiClient Attendant | P31003-H1012-C109-1-7619 | Conversion Date: 2002-01-25 | |
|
|
||
| © Siemens AG, München, 2002 | |||